dmesg - Maxtor 6B200M0 - Intel Core 2 Duo E6550
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-25-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 22:11:24 UTC 2012 (Ubuntu 3.2.0-25.40-generic-pae 3.2.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7345/MS-7345, BIOS V1.9 07/07/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7ffb0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 359a6000 - 36ccb000
ACPI: RSDP 000f9960 00014 (v00 ACPIAM)
ACPI: RSDT 7ffb0000 00034 (v01 070708 RSDT1523 20080707 MSFT 00000097)
ACPI: FACP 7ffb0200 00084 (v02 070708 FACP1523 20080707 MSFT 00000097)
ACPI: DSDT 7ffb0440 052B7 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
ACPI: FACS 7ffbe000 00040
ACPI: MCFG 7ffb0400 0003C (v01 070708 OEMMCFG 20080707 MSFT 00000097)
ACPI: OEMB 7ffbe040 00061 (v01 070708 OEMB1523 20080707 MSFT 00000097)
ACPI: GSCI 7ffbe0b0 02024 (v01 070708 GMCHSCI 20080707 MSFT 00000097)
1155MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x0007ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
free_area_init_node: node 0, pgdat c186d440, node_mem_map f49a6200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2312 pages used for memmap
HighMem zone: 293546 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: No APIC-table, disabling MPS
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7be3000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8387072 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007ffb0)
Memory: 2040908k/2096832k available (5828k kernel code, 55472k reserved, 2854k data, 740k init, 1183432k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc187b000 - 0xc1934000 ( 740 kB)
.data : 0xc15b1264 - 0xc187ad00 (2854 kB)
.text : 0xc1000000 - 0xc15b1264 (5828 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f4408000 soft=f440a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2337.759 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4675.51 BogoMIPS (lpj=9351036)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20110623
ACPI: setting ELCR to 0200 (from cca8)
ftrace: allocating 26619 entries in 53 pages
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Enabling APIC mode: Flat. Using 0 I/O APICs
SMP disabled
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (4675.51 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 7ffbe000 (204800 bytes)
print_constraints: dummy:
RTC time: 18:21:15, date: 11/20/12
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfbfffc00-0xfbffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfbfff800-0xfbfffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbfff400-0xfbfff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007]
pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03]
pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887]
pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803]
pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f]
pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f]
pci 0000:01:00.0: [10de:0290] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:04:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
pci 0000:04:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:05:00.0: [1814:0201] type 0 class 0x000280
pci 0000:05:00.0: reg 10: [mem 0xfebfe000-0xfebfffff]
pci 0000:05:02.0: [1106:3044] type 0 class 0x000c00
pci 0000:05:02.0: reg 10: [mem 0xfebfd800-0xfebfdfff]
pci 0000:05:02.0: reg 14: [io 0xec00-0xec7f]
pci 0000:05:02.0: supports D2
pci 0000:05:02.0: PME# supported from D2 D3hot D3cold
pci 0000:05:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a00-0x0adf]
pnp 00:08: [io 0x0ae0-0x0aef]
system 00:08: [io 0x0a00-0x0adf] has been reserved
system 00:08: [io 0x0ae0-0x0aef] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x0800-0x087f]
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0480-0x04bf]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed20000-0xfed8ffff]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0480-0x04bf] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xffb00000-0xffbfffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0b: [mem 0xffc00000-0xffefffff]
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
system 00:0c: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x7fffffff]
pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.5: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0x80200000-0x803fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x80600000-0x807fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x80600000-0x807fffff]
pci 0000:00:1c.0: bridge window [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff]
pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0104 -> 0107)
pci 0000:00:1c.4: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x80600000-0x807fffff]
pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1a.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pci 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 15 (level, low) -> IRQ 15
pci 0000:00:1a.1: PCI INT B disabled
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
pci 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14
pci 0000:00:1a.7: PCI INT C disabled
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
pci 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
pci 0000:00:1d.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1353435675.152:1): initialized
Trying to unpack rootfs image as initramfs...
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1674
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 18 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 19 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7345
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7345
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7345
pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 11
ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 11
ata_piix 0000:00:1f.5: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 11
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 11
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 14, io mem 0xfbfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xfbfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 10, io base 0x0000bc00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 15 (level, low) -> IRQ 15
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 15, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b480
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 14, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000b080
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
isapnp: No Plug & Play device found
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
ata4.00: 488397168 sectors, multi 16: LBA48
ata4.00: configured for UDMA/133
ata3.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
usb 2-2: new high-speed USB device number 2 using ehci_hcd
Freeing initrd memory: 19604k freed
Magic number: 4:267:393
pci_express 0000:00:1c.4:pcie08: hash matches
rtc_cmos 00:03: setting system clock to 2012-11-20 18:21:16 UTC (1353435676)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3.00: configured for UDMA/133
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Refined TSC clocksource calibration: 2337.740 MHz.
Switching to clocksource tsc
usb 2-3: new high-speed USB device number 3 using ehci_hcd
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
ata1.01: ATA-7: Maxtor 6B200M0, BANC1B10, max UDMA/133
ata1.01: 398297088 sectors, multi 0: LBA48 NCQ (not used)
ata1.01: configured for UDMA/133
scsi 0:0:1:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: Attached scsi generic sg0 type 0
scsi 1:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 1:0:1:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 >
sd 2:0:0:0: [sdc] Attached SCSI disk
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: [sdd] Attached SCSI disk
sda: sda1
sd 0:0:1:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 >
sd 1:0:1:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 740k freed
Write protecting the kernel text: 5832k
Write protecting the kernel read-only data: 2380k
NX-protecting the kernel data: 4408k
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
udevd[101]: starting version 175
usb 2-4: new high-speed USB device number 4 using ehci_hcd
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Adding 1030636k swap on /dev/zram0. Priority:100 extents:1 across:1030636k SS
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 20 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xf8418000, 00:19:db:d0:90:a0, XID 18000000 IRQ 20
r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
firewire_ohci 0000:05:02.0: PCI INT A -> Link[LNKC] -> GSI 14 (level, low) -> IRQ 14
usb 2-3.3: new low-speed USB device number 5 using ehci_hcd
firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input2
microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.7-3.3/input0
microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.1/input/input3
microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.7-3.3/input1
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
sd 4:0:0:2: Attached scsi generic sg6 type 0
sd 4:0:0:3: Attached scsi generic sg7 type 0
sd 4:0:0:0: [sde] Attached SCSI removable disk
sd 4:0:0:1: [sdf] Attached SCSI removable disk
sd 4:0:0:2: [sdg] Attached SCSI removable disk
sd 4:0:0:3: [sdh] Attached SCSI removable disk
firewire_core: created device fw0: GUID 0010dc00012fe162, S400
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Btrfs loaded
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 8670.000 MB/sec
xor: using function: pIII_sse (8670.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
end_request: I/O error, dev fd0, sector 0
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[484]: starting version 175
lp: driver loaded but no devices found
Adding 1952764k swap on /dev/sdb2. Priority:-1 extents:1 across:1952764k
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: Calling CRDA to update world regulatory domain
device-mapper: multipath: version 1.3.0 loaded
rt2500pci 0000:05:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2500pci-phy0::radio
Registered led device: rt2500pci-phy0::quality
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
snd_hda_intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 3 (level, low) -> IRQ 3
snd_hda_intel 0000:00:1b.0: irq 21 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC888: BIOS auto-probing.
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Adding 1951740k swap on /dev/sdc1. Priority:-2 extents:1 across:1951740k SS
type=1400 audit(1353428497.417:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=614 comm="apparmor_parser"
type=1400 audit(1353428497.417:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser"
type=1400 audit(1353428497.421:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=768 comm="apparmor_parser"
type=1400 audit(1353428497.421:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=768 comm="apparmor_parser"
type=1400 audit(1353428497.421:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=768 comm="apparmor_parser"
type=1400 audit(1353428497.421:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=808 comm="apparmor_parser"
type=1400 audit(1353428497.421:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
type=1400 audit(1353428497.421:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
type=1400 audit(1353428497.425:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser"
EXT4-fs (sdc5): re-mounted. Opts: discard,errors=remount-ro
init: failsafe main process (1051) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1353428498.017:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1163 comm="apparmor_parser"
r8169 0000:04:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Cannot change disksize for initialized device
init: zramswap pre-start process (1462) terminated with status 1
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (2698) terminated with status 1
eth0: no IPv6 routers present
warning: `proftpd' uses 32-bit capabilities (legacy support in use)